1057

Phidget Encoder HighSpeed

◈ 제품 특징

Read one encoder at speeds of up to 500,000 quadrature cycles per second. Connects directly to USB.

   

◈ 제품 설명

The PhidgetEncoder Highspeed interfaces with any 5V quadrature encoder. A quadrature encoder is the most commonly used feedback device for a DC or stepper motor. With an encoder, you can keep track of how far your motor has turned, which then allows you to control the position and velocity in your code. This Phidget connects to your computer via USB.

   

◈ Features

 ⦁ Works with all 0-5V quadrature encoders - read incremental encoders with line driver, open collector, or push-pull output circuits
 ⦁ Read at speeds of up to 500,000 quadrature cycles per second
 ⦁ Power Saving Options - You can turn it off via software when it's not turning. While disabled, this board draws 55mA of current.
 ⦁ High compatibility - Select between four different pull-up/pull-down resistor configurations in our API
 ⦁ Reports a timestamp in milliseconds for each position change event, for easy velocity calculation.

   

◈ Comes Packaged With

 ⦁ Hardware mounting kit:

 ⦁ 4x M3 Bolts (2cm Length)

 ⦁ 4x Plastic spacers (5mm Length)

 ⦁ 4x M3 Nuts

   

◈ Specifications

Encoder Interface

Controlled By

USB (Mini-USB)

API Object Name

Encoder

Number of Encoder Inputs

1

Count Rate Max

1E+06 pulses/s

Encoder Interface Resolution

x4

Sampling Interval Min

0.008 s/sample

Sampling Interval Max

1 s/sample

Encoder Input Low Voltage Max

1.7 V DC

Encoder Input High Voltage Min

2.1 V DC

Pull-down Resistance (Line Driver)

2.2 kΩ or 10 kΩ

Pull-up Resistance (Open Collector)

2.2 kΩ or 10 kΩ

USB Speed

High Speed

Electrical Properties

Current Consumption Max

500 mA

Current Consumption Min

55 mA

USB Voltage Min

4.5 V DC

USB Voltage Max

5.3 V DC

Physical Properties

Operating Temperature Min

-40 °C

Operating Temperature Max

85 °C

Customs Information

Canadian HS Export Code

8471.80.00

American HTS Import Code

8471.80.40.00